Home
Tuesday, June 27, 2017
10:19:08 AM
Users online: 0   You are here >> Home > Windows OS

Forums | Windows OS Forums search
Forum FAQ
   
  1 | 2 | 3 | 4 | 5 | 6 | 7 Next Page 
Installing Windows XP on your EEEPC
Lambo 
5/12/07 5:09:43 PM
Mod
SuperHero

Immortal


Here's my guide to installing Windows XP on your EEEPC.

Firstly, let me just say, that this is the method I used to install it. I've read and seen many other methods to do this. This is just what I did. If you feel there is an easier way, or that a step can be done quicker, feel free to post.

Update Note: I've only ever tested this on an EEEPC701 model. However I've read people use the same proceedure to install it on their 900/901 models. Since my next plan is for the 10000 model I'll be sure to test that one too.

Hardware you'll need

1.) A USB memory key. 1GB is recommended, but if your going to use a custom nLite installation of Windows XP, then you can get away with a 512MB one.

2a.) A SD Memory Card. Any size will do, even if you have a 16MB one laying around, that's heaps.

OR

2b.) A Second USB memory key. Any size. (It should be noted I've only tried this with the SD card option)

3.) A Windows XP SP 2 Installation CD.

Software you'll need

1.) Download physdiskwrite. A small utility to use for creating a boot disk for our XP installation.

http://m0n0.ch/wall/physdiskwrite.php

2.) A boot disk image.

http://freepctech.com/pc/002/files010.shtml

Grab the one called 'MS Windows XP System Setup Disk'.

Step 1: Creating a SD boot disk
Create a temporary directory on your PC and unzip physdiskwrite.exe into this folder.

Using your file compression program (WinRAR, WinZip, 7Zip etc) extract the file "WXPBOOT.IMA" to the same folder as physdiskwrite.exe.

NOTE: The wxpboot.exe is not an archive, programs such as WinRAR may throw an error, but still extract at least 'WXPBOOT.IMA'.

Insert your SD or your 2nd USB memory key into your PC.

Next go to into disk management of your PC by going into:
Control Panel --> Administration Tools --> Computer Management --> Disk Management

Make a special note of the drive number (not the letter) of your SD card or USB memory key.

Next open a command line and navigate to your temp directory where physdiskwrite.exe is located.

Type: physdiskwrite -u wxpboot.ima

WARNING: It will list all of your drives and ask you which one you want to write to. BE VERY CAREFUL HERE. You need to make sure you aren't writing to any of your actual hard disks.

It should only take a few seconds. This device becomes your 'boot disk'.

Step 2: Copying XP to your USB memory key
Take your windows XP installation CD and stick it in your DVD/CD drive.

Copy the folder 'i386' to your USB key (the first one, not the one you put your boot disk onto).

If you are using a standard XP SP2 CD without using nLite, it will be around 550MB to put on. I'd highly encourage anyone doing this to grab nlite at http://www.nliteos.com to cut down the size of your Windows XP size. Remove unwanted or unneeded utilites and applications to save room. (I was able to cut the CD size down to 325MB without to much sacrifice).

This USB key becomes our 'Windows Disk'.

Step 3: Preparing EEEPC
Insert your SD boot disk into the SD card slot, or USB port if it's a memory key.

Boot your EEEPC and go into it's bios by hitting F2 when it first switches on.

Change 'OS Insallation' to 'Start'. Hit F10 to save and exit.

As soon as the EEPC restarts hit escape to load the boot loader.

At the memu choose either your SD card if you used that, or the USB mem key.

It shouldn't take long and at some point will ask you to hit any key to continue.

When you finaly reach a command prompt you should see:

'A:\'

Type: fdisk

When asked if you want to enable large HDD support just hit Y or enter.

It should show several non-DOS partitions, and a DOS partition named BIOS. We want to wipe all these.

Once you've wiped all three partitions create a new partition DOS partition. Save and exit.

Restart your EEEPC (ALT+CTRL+DEL will do the trick here) and boot back into your boot disk again.

This time at the command prompt:

Type: format c: /s

Once it's formated ensure that the boot linux boot loader is gone by typing:

Type: fdisk /mbr

Your SSD should now be bootable to DOS without a boot disk.

Step 4: Installing XP Pro
Insert your Windows USB memory key into the left hand side USB port . The reason for this is that the boot disk assigns this port as 'D:\'.

Reboot your EEEPC back into the boot disk. Once there:

Type: d:
Type: cd i386
Type: winnt

The Windows XP installation should start. The first part will be windows copying temp files to your SSD drive. Windows may ask you where the i386 folder is. Just make it's pointed to the 'D:\i386' directory. When it's finished copying these files and is about to reboot, remove your USB memory key/s, and or SD memory card from the EEEPC as you won't require these anymore.

Reboot your EEEPC. You should see a windows boot loader appear that shows:

Windows
Windows XP Install/Upgrade (Or something to that nature).

Just let it boot on it's own, it will automatically start the next phase.

Now you should see the normal Windows XP installation start. When it asks you would you like to convert your HDD to NTFS, you should say yes.

From that point on, it should be a normal XP installation. Once it's complete and booted into windows the first time, restart the EEEPC, go into the bios by hitting F2 and change 'OS Installation' to 'Finished'.

It's recommended to install the ACPI driver, and then the chipset driver before other drivers.

Hopefully by this stage your in your fully functioning Windows XP EEEPC!

Just remember if you want to return at anytime back to the original image, you can create a new bootable restoration disk from the included EEEPC DVD.

One last thing. To remove the boot loader at the start of loading windows (where it asks you where you'd like to boot) go to:

Right Click My Computer->Properties->Advanced->Startup and Recovery

Make sure "Windows XP" is your default OS, and untick the "Time to display list of Operating Systems."

The EEEPC will then boot straight into Windows.

Lambo


Edited by Lambo: 18/7/2008 12:55:22 PM

-----
"Atomic is more than a magazine. It's an institution. But mostly a magazine. And a website."

"DON'T GET ELIMINATED!!!

KTS 
5/12/07 6:31:50 PM
Guru

Dammit, I knew it :(
physdiskwrite is a 16bit app and wont work properly under Vista, I get write errors when trying to create a bootable usb with it.

-----

Lambo 
5/12/07 6:43:21 PM
Mod
SuperHero

Immortal


Quote by KTS
Dammit, I knew it :(
physdiskwrite is a 16bit app and wont work properly under Vista, I get write errors when trying to create a bootable usb with it.



:( I'd say find a friends PC with XP on it to get this working.

-----
"Atomic is more than a magazine. It's an institution. But mostly a magazine. And a website."

"DON'T GET ELIMINATED!!!

KTS 
5/12/07 6:44:57 PM
Guru

I was just about to say all my friends have Vista, but remembered that my housemate runs XP!
To the batcave!

-----

.:Cyb3rGlitch:. 
5/12/07 6:58:44 PM
Guru

You should look into dual-booting your PC with both XP and Vista. :P

-----
Learn how to overclock your CPU and RAM: http://www.atomicmpc.com.au/forums.asp?s=2&c=27&t=283

Name the budget. I'll design the crème de la crème of all PCs.

KTS 
5/12/07 7:04:37 PM
Guru

You should look into buying an Eee and joining us cool kids :P

Using my housemates computer worked perfectly, I'm in the process of putting XP on now :)

-----

.:Cyb3rGlitch:. 
5/12/07 7:15:58 PM
Guru

Quote by KTS
You should look into buying an Eee and joining us cool kids :P


Hey, it's Myers fault I don't have one. :)

-----
Learn how to overclock your CPU and RAM: http://www.atomicmpc.com.au/forums.asp?s=2&c=27&t=283

Name the budget. I'll design the crème de la crème of all PCs.

Lambo 
5/12/07 10:43:36 PM
Mod
SuperHero

Immortal


I'll post some tweaks you can do to speed things up in XP, and may delve further into how 'lite' an installation I can go. :P

-----
"Atomic is more than a magazine. It's an institution. But mostly a magazine. And a website."

"DON'T GET ELIMINATED!!!

KTS 
5/12/07 11:13:22 PM
Guru

Yeah, my nLite version of XP failed, so I'm going for full XP, then I'll tweak it. It's a pity, my nLite was down to 195Mb

-----

iamthemaxx 
6/12/07 10:27:47 AM
Mod
Hero

Immortal


Some other cool EEE stuff, installing 16GB and bluetooth - http://forum.eeeuser.com/viewtopic.php?id=3982

-----

Lambo 
6/12/07 11:34:35 AM
Mod
SuperHero

Immortal


Quote by KTS
Yeah, my nLite version of XP failed, so I'm going for full XP, then I'll tweak it. It's a pity, my nLite was down to 195Mb



That's a little too light. :P

-----
"Atomic is more than a magazine. It's an institution. But mostly a magazine. And a website."

"DON'T GET ELIMINATED!!!

.:Cyb3rGlitch:. 
7/12/07 8:50:57 PM
Guru

Is it possible to install a XP Pro Upgrade version of Windows this way?

-----
Learn how to overclock your CPU and RAM: http://www.atomicmpc.com.au/forums.asp?s=2&c=27&t=283

Name the budget. I'll design the crème de la crème of all PCs.

Lambo 
7/12/07 9:22:27 PM
Mod
SuperHero

Immortal


An upgrade version?

Hmmm technically I suppose it is possible.

Afterall an upgrade CD can be used to do a fresh install....

That one you'll have to put down to trial and error.

-----
"Atomic is more than a magazine. It's an institution. But mostly a magazine. And a website."

"DON'T GET ELIMINATED!!!

.:Cyb3rGlitch:. 
7/12/07 10:00:13 PM
Guru

Hmmm, I wonder how I would do this. XP Upgrade asks for a previous Windows OS CD doesn't it? I don't really feel like installing Windows ME first. :S

-----
Learn how to overclock your CPU and RAM: http://www.atomicmpc.com.au/forums.asp?s=2&c=27&t=283

Name the budget. I'll design the crème de la crème of all PCs.

Lambo 
7/12/07 11:27:34 PM
Mod
SuperHero

Immortal


Quote by .:Cyb3rGlitch:.
Hmmm, I wonder how I would do this. XP Upgrade asks for a previous Windows OS CD doesn't it? I don't really feel like installing Windows ME first. :S



You shouldn't need to. The upgrade disk should only ask that you have a previous edition of Win.

-----
"Atomic is more than a magazine. It's an institution. But mostly a magazine. And a website."

"DON'T GET ELIMINATED!!!

Bugiman 
7/12/07 11:38:15 PM
Serf
Hi There. I've done everything as you've said , but when the setup finished copying files on my ssd and I remove my usb and sd card. I restart the eee pc and I get black screen only saying error 17. Can someone help?

-----

Lambo 
7/12/07 11:50:23 PM
Mod
SuperHero

Immortal


Quote by Bugiman
Hi There. I've done everything as you've said , but when the setup finished copying files on my ssd and I remove my usb and sd card. I restart the eee pc and I get black screen only saying error 17. Can someone help?



Did you use a custom nlite installation by chance?

-----
"Atomic is more than a magazine. It's an institution. But mostly a magazine. And a website."

"DON'T GET ELIMINATED!!!

Bugiman 
7/12/07 11:56:03 PM
Serf
Yes I did. I cut it down to 377mb.

-----

Bugiman 
8/12/07 6:21:12 AM
Serf
I've tried with a full installation of win xp without nlite and it's the same.I would appreciate it if someone can help me.

-----

markjensen 
8/12/07 6:36:21 AM
Serf

I'm pretty sure that the MBR command is
fdisk /mbr

Not the "format /mbr" that you have listed.

-----

  1 | 2 | 3 | 4 | 5 | 6 | 7  | Next Page 
Forums | Windows OS